How to deal with the housekeeper's standard parallel port dongle when the dongle cannot be found?
Tip: what if the dongle cannot be found?
How to deal with the situation where the parallel dog cannot be found:
Stand alone version
Processing 1: Download and install the parallel port dog driver on the home page, and restart;
Process 2: under the system Windows \ system \, if it is WIN2000 or XP, under Windows \ system32 \, find the two files tdmd.vxd and tdsd.vxd. If they are not or their size is 0, reinstall a set in other directories and copy the two files to the above directories;
Process 3: enter CMOS settings and modify the settings of print parallel port. Because the CMOS menus of mainboards of different brands are different, please go to the sub menu to find the menu with the word parallel. There are ECP, spp, EPP + ECP and other settings behind it. Try each setting;
Process 4: replace the dongle with USB interface( 7. X can only be version 7.2 and needs to be patched, please contact the customer department)
Network Edition
Process 1: install a new parallel dog driver and restart;
Process 2: go to the DOS of the server, find the DRV directory under the server installation folder, enter "dog remove", confirm and then enter "dog install" to restart;
Process 3: enter CMOS setting and set parallel port mode;
Process 4: insert the dongle into the computer at the workstation and install the server on this computer, but log in to the original server without running the server program;
The USB dog cannot find the solution
Brilliant 7.2 stand-alone, 8. X stand-alone and standard stand-alone. You can download the USB dog driver on the home page( 7.2 if a single machine needs to be patched, please contact the customer department).
No comments:
Post a Comment